Imputation pipeline

There are at the moment two collaborating initiatives:

• VU: Mathijs Kattenberg and Joukejan Hottenga using IMPUTE
• UMCG: Lude Franke, Harm-Jan Westra, George Byelas, Morris Swertz using Beagle

The objective is to bring these pipelines into the same space so they can be properly compared and optimized.

TODO: describe the protocols here;

Description from Harm-Jan

The imputation pipeline has changed, in such a way that it was reduced to only a few steps. To facilitate QC and conversion steps, I've bundled our conversion tools in one single program called ImputationTool.jar.

Here, I shortly describe the steps that need to be in the new pipeline, in placeholders I also describe what the commands could look like, if you would implement this in a shellscript (or java program). These examples can be the complete execution steps of the pipeline.

Commands to run locally:

Step 1

• According to Harm-Jan: if the dataset is in binary plink format, use plink —recode to convert back to ped+map
• Transform .bed , .bim and .fam files into ASCII format

  /Users/alexandroskanterakis/Tools/plink/plink-1.07-mac-intel/plink --bfile /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05 --ped /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.ped --map CD_Finnuncorr.maf05.map --recode
  
  

• Produces the files:

  -rw-r--r--   1 alexandroskanterakis  staff    11761120 Oct  5 12:11 plink.map
  -rw-r--r--   1 alexandroskanterakis  staff  4898208052 Oct  5 12:11 plink.ped
  

• real Execution time: 26m20.723s
• creates rather big files 4.6G plink.ped

Step 2

• Convert dataset to trityper format, if it is in ped+map format.

  java -Xmx4g -jar /Users/alexandroskanterakis/Tools/imputation/ImputationTool/dist/ImputationTool.jar --mode pmtt --in /Users/alexandroskanterakis/Data/Finnish_cohort/ --out /Users/alexandroskanterakis/Data/Finnish_cohort/ 
  
  real	74m52.547s
  user	38m14.646s
  sys	5m25.472s
  
  

• Files Created:

  -rw-r--r--   1 alexandroskanterakis  staff  2449071024 Oct  5 15:05 GenotypeMatrix.dat
  -rw-r--r--   1 alexandroskanterakis  staff       46196 Oct  5 13:54 Individuals.txt
  -rw-r--r--   1 alexandroskanterakis  staff       98791 Oct  5 13:54 PhenotypeInformation.txt
  -rw-r--r--   1 alexandroskanterakis  staff    10771996 Oct  5 13:54 SNPMappings.txt
  -rw-r--r--   1 alexandroskanterakis  staff     5006368 Oct  5 13:54 SNPs.txt
  

Step 3

• compare the dataset to be imputed to the reference dataset (for example HapMap??2 release 24, also in TriTyper?? format), and remove any snps for which the haplotypes are different, or do not correlate to the reference dataset. Also remove any SNP that is not in the reference. Save the output as Ped+Map

  java -Xmx4g -jar /Users/alexandroskanterakis/Tools/imputation/ImputationTool/dist/ImputationTool.jar --mode ttpmh --in /Users/alexandroskanterakis/Data/Finnish_cohort/ --hap /Users/alexandroskanterakis/Data/HapMap2-r24-CEU/ --out /Users/alexandroskanterakis/Data/Finnish_cohort/referenceOutput/ 
  
  real	60m53.623s
  user	30m35.172s
  sys	2m34.325s
  

• Created Files (for each chromosome):

  -rw-r--r--    1 alexandroskanterakis  staff    221184 Oct  5 16:07 chr1.dat
  -rw-r--r--    1 alexandroskanterakis  staff   1004358 Oct  5 16:06 chr1.excludedsnps.txt
  -rw-r--r--    1 alexandroskanterakis  staff    442368 Oct  5 16:07 chr1.map
  -rw-r--r--    1 alexandroskanterakis  staff    441350 Oct  5 16:07 chr1.markersBeagleFormat
  -rw-r--r--    1 alexandroskanterakis  staff   5802372 Oct  5 16:07 chr1.ped
  -rw-r--r--    1 alexandroskanterakis  staff    117708 Oct  5 16:06 chr1.warningsnps.txt
  

Steps 4-9

• beagle: imputes in batches of samples (imputes the whole genome in subsets of samples)

• impute: imputes all samples at once for subset of a genome. Select a window
  4. split the ped files in batches of 300 samples

       * mkdir -p ".$datasetLocation."/batches/
       * split -a2 -l$batchSize $pedAndMapOutputLocation $batchOutputLocation
     

  5. run linkage2beagle to convert the ped and map files to beagle format

     for each batch 
     do
           java -Xmx7g -jar linkage2beagle.jar data=$batchOutputLocation/chr$chromosome.dat pedigree=$batchOutputLocation/chr$chromosome.ped.$batch  beagle=$beagleLocation/chr$chromosome.bgl.$batch
     done 
     

Commands to run in server:

6. run the actual imputation on the batches on the cluster (needs hapmap to be recoded to beagle format as well, but I have these files for you)

   for each batch 
   do
   	java -Xmx11g -Djava.io.tmpdir=\$TMPDIR -jar beagle.jar unphased=$beagleLocation/chr$chromosome.bgl.$batch phased=$referenceLocation/HM2_Chr$chromosome-BEAGLE markers=$referenceLocation/markers_Chr$chromosome.txt missing=0 out=$outputLocation/Chr$chromosome/chr$chromosome-$batch
   done
   

Commands to run locally:

7. convert the beagle imputed files into trityper format

   java -Xmx4g -jar ImputationTool.jar bttb $outputLocation Chr/ChrCHROMOSOME-BATCH $imputedTriTyperLocation $numSamples	
   

8. correlate the imputed snps to the snps in the original dataset

   java -Xmx4g -jar ImputationTool.jar corr $trityperOutputLocation $datasetName $imputedTriTyperLocation $imputedDatasetName 
   

9. (if needed) convert to other formats (plink dosage / ped+map))

That's basically it. A lot simpler than the previous version, don't you think? The required tool is attached to this e-mail, but might still be a bit buggish. Any recommendations are therefore more than welcome.

IMPUTE pipeline

ConvertBedBimFamToPedMap?

This script converts BED, BIM, FAM files to PED and MAP by using plink. The "Path to BED, BIM, FAM file" parameter should contain the path and the suffix of these files. For example if the files are:

• /path/to/FILE1.maf05.bed
• /path/to/FILE1.maf05.bim
• /path/to/FILE1.maf05.fam

Then the parameter value should be: /path/to/FILE1.maf05

'Note: creates rather big plink.ped files

Parameters

• Path to plink executable (example: /Users/alexandroskanterakis/Tools/plink/plink-1.07-mac-intel/plink)
• Path to BED, BIM, FAM file (example: /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05)
• Filename of exported PED file (example: /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.ped)
• Filename of exported MAP file (example: /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.map)

Example of usage:

Code highlighting:

ConvertBedBimFamToPedMap(

    plink_path="/Users/alexandroskanterakis/Tools/plink/plink-1.07-mac-intel/plink",
    bbf_path="/Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05",  
    ped_path="/Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.ped", 
    map_path="/Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.map")

Source code

http://www.bbmriwiki.nl/svn/Imputation/impute2/ConvertBedBimFamToPedMap.py

DividePedMapToChromosomes?

This script divides a pair of PED and MAP files to chromosomes by using plink (​http://pngu.mgh.harvard.edu/~purcell/plink/).

Parameters

• path to plink (example: /Users/alexandroskanterakis/Tools/plink/plink-1.07-mac-intel/plink) 
• path to map file (example: /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.map) 
• path to ped file (example: /Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.ped) 
• Directory where files will be exported (example: /Users/alexandroskanterakis/Data/Finnish_cohort/DividedChromosomes) 
• Suffix of the exported files (example: output_) 

Example

Code highlighting:

DividePedMapToChromosomes(
        plink_path= "/Users/alexandroskanterakis/Tools/plink/plink-1.07-mac-intel/plink",
        map_path="/Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.map",
        ped_path="/Users/alexandroskanterakis/Data/Finnish_cohort/CD_Finnuncorr.maf05.ped",
        output_path="/Users/alexandroskanterakis/Data/Finnish_cohort/DividedChromosomes",
        suffix="output_")

Source code

http://www.bbmriwiki.nl/svn/Imputation/impute2/DividePedMapToChromosomes.py

BEABLE pipeline

TODO: paste shell script descriptions of each step

Discussion

Mixing platforms may influence imputation results

We into some troubles, resulting in our test statistic being highly inflated (which is indicative of false positive results). We thought of some possible causes which might explain this effect, although we should still test them:

• SNPs with bad imputation quality: we should remove SNPs with an R2 value < 0.90 prior to GWAS. These values are stored alongside the beagle imputation output. Taking a more stringent cutoff seemed to decrease the inflation, although you lose half of the SNPs.
• batch effects caused by overrepresentation of a certain haplotype within an imputation batch: for each batch of samples, beagle estimates a best fitting model to predict the genotypes of the missing SNPs, which is dependent upon both the input data as the reference dataset. Cases and controls should be therefore randomly distributed across the batches. Another option is to use impute, rather than beagle, since its batches are across parts of the genome, instead of samples.
• difference in source platform: different platforms have different SNP content. When you impute datasets coming from different platforms, the resulting model which is based on the input data is also different. When associating traits in a GWAS meta-analysis, these differences may account for a platform specific effect. We should therefore remove the SNPs which are non-overlapping between such platforms, prior to imputation, and impute the samples after combining the datasets. This would remove such a platform-bias, although would also cause a huge loss of available SNPs, when the overlap between platforms is small. However, in my opinion, this problem is similar to the batch effect problem, and can possibly be resolved by randomizing the sample content of the batches: the model will then possibly be fitted to the data that is available. In any case the datasets that are used in a meta-analysis should be imputed together.